- Resistivity(25°C):10-16MΩ.cm
- Salt rejection 95-99% (with new RO membrane)
- Conductivity:<0.1us/cm
- TDS (RO Water): <10ppm
- 2 water outlets: RO water, deionized water
PRO-PLUS Deionized Water System
Feature
- Ergonomic design, the machine is beautiful and generous in compliance with GLP requirements
- Fully automatic microcomputer control system, online water quality monitoring system
- New quick plug-in connector, filter column replacement and maintenance is more convenient for the electrical and water channels to be completely separated.
- Fully automatic RO membrane anti-fouling washing program and regular washing program to prolong the service life of RO membrane
- Power, water source, pump, flush, water shortage, full water status display, understand the machine running status
- Floor-standing design, with movable and fixed feet at the bottom, making installation and movement more convenient
- RO water, deionized water, two kinds of water outlets
- Free TDS water quality test pen
Application
Preposition unit of ultra pure water system, supply water for biochemical analyzer, electroplating painting, battery charging, chips washing, microbial culture media, chemical&biochemical regent preparation, buffer making, photographic film processing, stability test chamber, meteorological test equipment, hydrogen generator, salt.
Process
Filter function
- First stage: PP cotton (PPF filter with a pore size of 5 microns): Preliminary filtration of raw water to remove coarser particles, colloids, suspended solids, etc. in the water.
- Second stage: Granular activated carbon: high-efficiency adsorption of odor, color, organic matter, and heavy metals in water Third stage: Compressed activated carbon: further remove residual chlorine, organic compounds, color, odor, turbidity, etc.
- The fourth stage: RO reverse osmosis membrane: 0.0001 micron pore size, effectively removes organic impurities such as viruses and heavy metals in water.
- The fifth stage: Deionization purification tank: remove most of the heavy metals and trace elements in the water, and the water quality meets the national laboratory water first-grade water standard.
Specification
Model | PRO-PLUS-DI-150 | PRO-PLUS-DI-200 | PRO-PLUS-DI-250 |
Output | 150L/H | 200L/H | 250L/H |
Production speed | 3 L/min (with pressure barrel) | ||
Water requirements | Urban tap water, inlet water pressure: 0.15-0.5mpa, water temperature 5-40℃,TDS<200ppm | ||
RO Water Parameter | |||
Ion rejection rate | 97%-99% (when using a new RO membrane) | ||
Organic matter rejection rate | >99% when MW>200 Dalton | ||
Particle and bacterial rejection | > 99% | ||
Application | Clean glassware | ||
DI Water Parameter (ASTM TYPE II Grade Water) | |||
Resistivity (25℃) | 10~16 M Ω. Cm @ 25 ℃ | ||
Conductivity | < 0.1 μS/cm | ||
Application | Preposition unit of ultra pure water system, supply water for biochemical analyzer, electroplating painting, battery charging, chips washing, microbial culture media, chemical&biochemical regent preparation, buffer making, photographic film processing, stability test chamber, meteorological test equipment, hydrogen generator, salt spray test chamber. | ||
Electrical requirements | 100-240V, 50/60Hz, 48-72W | ||
The system configuration | Host machine (including 1 set of purification column)+ 100L pressure water tank +TDS pen + accessory bag |
Consumables
No | Filter element | Replace Cycle | Remark |
1 | 20″ 5um PP Cotton Filter | About 4~6 month | |
2 | 20″ Refine Activated Carbon Filter | About 4~6 month | |
3 | 400 GPD RO membrane | About 1~2 years | |
4 | 600 GPD RO membrane | About 1~2 years | |
5 | 25L deionized purification tank | About 50 tons |
Related suggestion
Request for quotation
Product Center
- Laboratory Centrifuge
- Spectrophotometer
- Laboratory Balance
- Water Quality Analysis
- Lab Printer
- Incubator & Oven
- Life Science Instrument
- Autoclave/Sterilizer
- Refrigerator & Freezer
- Microscope
- Regular Desktop Instruments
- Grinders & Mills
- Freeze Dryer
- Organic Element Analysis
- Spectrum/Chromatography
- Water Purification System
- PRP & PRF